PA12 derva

PA12 resin is a high-performance plastic known for its exceptional strength, toughness, and durability. It’s a type of nylon resin, also called Nailonas 12, and is valued for its resistance to chemicals, abrasion, and low temperatures.

Item No.: PA12 MA01

Spalva: juoda

GAUTI NEMOKAMĄ PASIŪLYMĄ

Breif Introduction of PA12 Resin

PA12 resin, also known as nylon PA12, is a high-performance plastic belonging to the polyamide family. Compared to its close relative, PA6 (nylon 6), PA12 offers several advantages. PA12 resin demonstrates superior low-temperature performance, making it ideal for applications in cold environments. Additionally, it boasts higher impact strength and better resistance to chemicals.

Here’s a closer look at how PA12 resin compares to PA6:

Low-temperature performance: PA12 excels in cold environments, remaining flexible and functional at much lower temperatures than PA6.
Impact strength: PA12 resin offers superior impact resistance, making it more resistant to shocks and fractures.
Atsparumas cheminėms medžiagoms: PA12 exhibits better resistance to a wider range of chemicals compared to PA6.

However, there are also some trade-offs to consider between PA12 resin and PA6:

Melting temperature: PA12 has a lower melting temperature compared to PA6. This can limit its use in high-heat applications.
Išlaidos: PA12 resin is generally more expensive than PA6.

In conclusion, when choosing between PA12 resin and PA6, the deciding factor often comes down to the specific application’s requirements. If low-temperature performance, impact strength, and chemical resistance are critical, PA12 resin might be the better choice. However, if cost or high-heat resistance is a major concern, PA6 might be a more suitable option.

Application Industry of PA12 Resin

Automobile Manufacturing

Fitness Equipment

Tubing

PA12 Resin Data

Fizikinės savybės	Metrinis	Anglų kalba	Komentarai
Savitasis svoris	1.02 g/cc	1.02 g/cc	ASTM D792
Vandens absorbcija	0.30 %	0.30 %	24 valandos 23 °C temperatūroje; ASTM D570
Linijinis pelėsių susitraukimas	0,015 cm/cm storis 3,17 mm	0,015 in/in 0,125 col. storis	ASTM D955
	0,020 cm/cm 6,35 mm storio	0,020 in/in 0,250 colio storis	ASTM D955

Mechaninės savybės	Metrinis	Anglų kalba	Komentarai
Kietumas, Rokvelo R	108	108	ASTM D785
Tempimo stipris, galutinis	44.8 MPa	6500 psi	ASTM D638
Pailgėjimas pertrūkio metu	>= 10 %	>= 10 %	ASTM D638
Tamprumo modulis	1.38 GPa	200 ksi	ASTM D638
Lankstumo stipris	51.7 MPa	7500 psi	ASTM D790
Lankstumo modulis	1.38 GPa	200 ksi	ASTM D790
"Izod Impact", su įpjovomis	0,481 J/cm storis 3,17 mm	0,900 ft-lb/in 0,125 col. storis	ASTM D256
"Izod Impact", be įpjovos	16,0 J/cm storis 3,17 mm	30,0 ft-lb/in 0,125 col. storis	ASTM D256

Elektrinės savybės	Metrinis	Anglų kalba	Komentarai
Elektrinė varža	1,00e+12 om-cm	1,00e+12 om-cm	ASTM D257

Šiluminės savybės	Metrinis	Anglų kalba	Komentarai
Deformacijos temperatūra esant 0,46 MPa (66 psi)	138 °C	280 °F	ASTM D648
Deformacijos temperatūra esant 1,8 MPa (264 psi)	51.7 °C	125 °F	ASTM D648
Degumas, UL94	HB 1,59 mm storio	HB storis 0,0625 col.	Per testing by RTP Company; ASTM D635

Apdorojimo savybės	Metrinis	Anglų kalba	Komentarai
Apdorojimo temperatūra	216 – 266 °C	420 – 510 °F
Pelėsių temperatūra	65.6 – 104 °C	150 – 220 °F
Įpurškimo slėgis	68.9 – 103 MPa	10000 – 15000 psi